AI summary · arXiv: 2611.05497v1 · quant-ph
Boosted Entanglement Swapping
The essentials
The authors demonstrate ancilla-assisted linear-optical entanglement swapping, reporting a 69.39% acceptance rate and 76.6% average fidelity for the swapped states.
Based on the abstract only: check the details in the original paper.
Question
Can ancilla-assisted linear-optical Bell-state measurement boost entanglement swapping beyond the 50% success-probability limit of standard linear-optical implementations? The study also examines implementation at 1550 nm for potential use in quantum communication.
Method
The authors implement boosted entanglement swapping with photons at 1550 nm, using an ancilla-assisted linear-optical Bell-state measurement designed to identify all four Bell states. They report the theoretical success probability and measure the acceptance rate and average fidelity of the swapped states.
Findings
-
Result
The ancilla-assisted measurement raises the theoretical success probability to 62.5% and allows identification of all four Bell states.
See the passage in the paper
Here, we demonstrate boosted entanglement swapping using an ancilla-assisted linear-optical Bell-state measurement, which raises the theoretical success probability to $62.5\%$ and allows all four Bell states to be identified.
-
Result
The measured acceptance rate was 69.39% with an uncertainty of 0.39%.
See the passage in the paper
We measure an acceptance rate of $p_{\mathrm{a}}^{\mathrm{b}}=(69.39\pm0.39)\%$ with an average fidelity of the swapped states of $\langle F^{\mathrm{b}}\rangle=(76.6\pm1.0)\%$.
-
Result
The average fidelity of the swapped states was 76.6% with an uncertainty of 1.0%.
See the passage in the paper
We measure an acceptance rate of $p_{\mathrm{a}}^{\mathrm{b}}=(69.39\pm0.39)\%$ with an average fidelity of the swapped states of $\langle F^{\mathrm{b}}\rangle=(76.6\pm1.0)\%$.
-
Authors’ interpretation
The authors argue that implementation at 1550 nm makes the protocol well suited to quantum repeaters and potentially useful for fusion-based quantum computing.
See the passage in the paper
We implement this protocol using photons at 1550 nm, making it well suited for quantum repeaters, where it could enable more efficient entanglement distribution. Beyond quantum communication, it could also enhance fusion-based quantum computing.
Limitations
- The provided abstract does not report a limitation; the evidence summarized is limited to the stated 1550 nm implementation and its measured acceptance rate and fidelity.
Why it matters
The authors present ancilla-assisted Bell-state measurement as a way to exceed the conventional 50% linear-optical limit for entanglement swapping. They suggest this could improve entanglement distribution in quantum repeaters and enhance fusion-based quantum computing.
Written by AI from the paper. Passages are checked word for word against the text we analysed; the rest may contain errors.
Ask questions about this paper to our AI assistant
How to chat with this paper? Illustrated guide
You can also chat with multiple papers at once here.
⚠The license of the paper does not allow us to build upon its content and the AI assistant only knows about the paper metadata rather than the full article.
Keep this conversation — a free account saves your questions and answers, your collections of papers and your alerts.
Continue with Google Create a free accountTools for this paper
Advanced tools Premium
For researchers who follow a field closely: citation alerts, journal-club slides, version comparison and Zotero export. Discover Premium
Papers around this one
See them on a mapRanked by how close their title and abstract are to this paper’s. Select some to read them together.
Closest papers
-
Boosted Bell-state measurements for photonic quantum computationNico Hauser, Matthias J. Bayerbach, Simone E. D'Aurelio et al. · 2024 · npj Quantum Information · cited 28 times · Not summarized yet
Boosted Bell-state measurements for photonic quantum computation uses an entangled photon-pair ancilla and a multiport splitter to raise linear-optical measurement success to 75%.
Abstract
Fault-tolerant fusion-based photonic quantum computing (FBQC) greatly relies on entangling two-photon measurements, called fusions. These fusions can be realized using linear-optical projective Bell-state measurements (BSMs). These linear-optical BSMs are limited to a success probability of 50%, greatly reducing the performance of FBQC schemes. The performance of FBQC can be improved using boosting, thus achieving higher success probabilities by adding additional resources. Here, we realize a boosted BSM using a 4 × 4 multiport splitter and an additional entangled photon pair, allowing for a success probability of up to 75%. In our experiment, we obtain a success probability for our boosted …
-
Boosted quantum teleportationSimone E. D'Aurelio, Matthias J. Bayerbach, Stefanie Barz · 2024 · npj Quantum Information · cited 15 times · Not summarized yet
Boosted quantum teleportation uses boosted Bell-state measurement to exceed the 50% linear-optical limit in quantum teleportation.
Abstract
Quantum teleportation has proven to be fundamental for many quantum information and communication processes. The core concept can be exploited in many tasks, from the transmission of quantum states, quantum repeaters, to quantum computing. However, for linear-optical systems, the efficiency of teleportation is directly linked to the success probability of the involved Bell-state measurement (BSM). In most implementations, this is realized by linear optics with an intrinsically limited success probability of 50%. Here, we demonstrate quantum teleportation surpassing this limit. We achieve an average fidelity of the teleported states of 0.8677 ± 0.0024, leading to an overall acceptance rate of…
-
Bell-state measurement exceeding 50% success probability with linear opticsMatthias J. Bayerbach, Simone E. D'Aurelio, P. van Loock et al. · 2022 · Science Advances · cited 85 times · Not summarized yet
Bell-state measurement exceeding 50% success probability with linear optics experimentally uses ancillary photons to reach 62.5%, the measurement strategy used for boosted swapping.
Abstract
Bell-state projections serve as a fundamental basis for most quantum communication and computing protocols today. However, with current Bell-state measurement schemes based on linear optics, only two of four Bell states can be identified, which means that the maximum success probability of this vital step cannot exceed 50%. Here, we experimentally demonstrate a scheme that amends the original measurement with additional modes in the form of ancillary photons, which leads to a more complex measurement pattern, and ultimately a higher success probability of 62.5%. Experimentally, we achieve a success probability of (57.9 ± 1.4)%, a substantial improvement over the conventional scheme. With the…
-
Experimental entanglement swapping through single-photon χ(2) nonlinearityYoshiaki Tsujimoto, K. Wakui, Tadashi Kishimoto et al. · 2024 · Nature Communications · cited 6 times · Not summarized yet
Experimental entanglement swapping through single-photon χ(2) nonlinearity performs swapping through nonlinear photon interactions rather than an ancilla-assisted linear-optical Bell measurement.
Abstract
In photonic quantum information processing, quantum operations using nonlinear photon-photon interactions are vital for implementing two-qubit gates and enabling faithful entanglement swapping. However, due to the weak interaction between single photons, the all-photonic realization of such quantum operations has remained out of reach so far. Herein, we demonstrate an entanglement swapping using sum-frequency generation between single photons in a χ(2)-nonlinear optical waveguide. We show that a high signal-to-noise ratio (SNR), stable sum-frequency-generation-based entanglement heralder with an ultralow-dark-count superconducting single-photon detector can satisfy the unprecedented SNR requ…
-
Multipartite entanglement swapping with homodyne and single photon detectionTarek Assaf, Josephine Dias · 2026 · Not summarized yet
Multipartite entanglement swapping with homodyne and single photon detection studies optical entanglement swapping, using a continuous-variable protocol to generate multipartite states.
Abstract
Establishing multipartite entanglement across lossy optical networks remains a central challenge for distributed quantum information processing. Here, we consider a non-Gaussian continuous-variable entanglement-swapping protocol combining a symmetric discrete Fourier transform (DFT) interferometer with photon-number-resolving detection. In the ideal limit, single-photon heralding generates a $W_N$-class state across remote modes, with Fourier symmetry rendering all single-click outcomes equivalent up to local phase corrections. We find that conditional pairwise entanglement can exceed that of conventional Gaussian homodyne swapping in weak-to-moderate squeezing and lossy regimes, remaining n…
-
Hyperentanglement-assisted Bell-state analysisS. Walborn, S. P'adua, C. Monken · 2003 · Physical Review A · cited 217 times · Not summarized yet
Hyperentanglement-assisted Bell-state analysis proposes complete Bell-state identification using photons entangled across multiple degrees of freedom.
Abstract
We propose a simple scheme for complete Bell-state measurement of photons using hyperentangled states-entangled in multiple degrees of freedom. In addition to hyperentanglement, our scheme requires only linear optics and single photon detectors, and is realizable with current technology. At the cost of additional classical communication, our Bell-state measurement can be implemented nonlocally. We discuss the possible application of these results to quantum dense coding and quantum teleportation.
-
3/4-Efficient Bell measurement with passive linear optics and unentangled ancillae.Fabian Ewert, P. van Loock · 2014 · Physical Review Letters · cited 180 times · Not summarized yet
3/4-Efficient Bell measurement with passive linear optics and unentangled ancillae proposes surpassing the 50% Bell-measurement limit by adding single-photon ancillae.
Abstract
It is well known that an unambiguous discrimination of the four optically encoded Bell states is possible with a probability of 50% at best, when using static, passive linear optics and arbitrarily many vacuum-mode ancillae. By adding unentangled single-photon ancillae, we are able to surpass this limit and reach a success probability of at least 75%. We discuss the error robustness of the proposed scheme and a generalization to reach a success probability arbitrarily close to 100%.
-
Experimental Entanglement Swapping: Entangling Photons That Never InteractedJian-Wei Pan, D. Bouwmeester, H. Weinfurter et al. · 1998 · Physical Review Letters · cited 1,170 times · Not summarized yet
Experimental Entanglement Swapping: Entangling Photons That Never Interacted reports an experimental realization of the entanglement-swapping operation studied here.
Prior work it builds on
-
"Event-ready-detectors" Bell experiment via entanglement swapping.M. Żukowski, A. Zeilinger, M. A. Horne et al. · 1993 · Physical Review Letters · cited 1,746 times · Not summarized yet
“Event-ready-detectors” Bell experiment via entanglement swapping uses swapping in a Bell experiment to enable event-ready detection.
-
A nondestructive Bell-state measurement on two distant atomic qubitsStephan Welte, P. Thomas, Lukas Hartung et al. · 2021 · Nature Photonics · cited 40 times · Not summarized yet
A nondestructive Bell-state measurement on two distant atomic qubits demonstrates complete, nondestructive measurement on separated atoms rather than photonic swapping.
Abstract
One of the most fascinating aspects of quantum networks is their capability to distribute entanglement as a nonlocal communication resource1. In a first step, this requires network-ready devices that can generate and store entangled states2. Another crucial step, however, is to develop measurement techniques that allow for entanglement detection. Demonstrations for different platforms3–13 suffer from being not complete, destructive or local. Here, we demonstrate a complete and nondestructive measurement scheme14–16 that always projects any initial state of two spatially separated network nodes onto a maximally entangled state. Each node consists of an atom trapped inside an optical resonator…
-
Resource-efficient linear optical quantum computation.D. Browne, T. Rudolph · 2004 · Physical Review Letters · cited 704 times · Not summarized yet
Resource-efficient linear optical quantum computation develops linear-optical measurement and entanglement techniques for cluster-state quantum computation.
Abstract
We introduce a scheme for linear optics quantum computation, that makes no use of teleported gates, and requires stable interferometry over only the coherence length of the photons. We achieve a much greater degree of efficiency and a simpler implementation than previous proposals. We follow the "cluster state" measurement based quantum computational approach, and show how cluster states may be efficiently generated from pairs of maximally polarization entangled photons using linear optical elements. We demonstrate the universality and usefulness of generic parity measurements, as well as introducing the use of redundant encoding of qubits to enable utilization of destructive measurements--b…
-
Maximum efficiency of a linear-optical Bell-state analyzerJ. Calsamiglia, Norbert Lutkenhaus · 2000 · Applied Physics B · cited 318 times · Not summarized yet
Maximum efficiency of a linear-optical Bell-state analyzer analyzes Bell-measurement efficiency limits for linear optics with vacuum ancillary modes.
Abstract
Abstract.In a photonic realization of qubits the implementation of quantum logic is rather difficult due to the extremely weak interaction on the few photon level. On the other hand, in these systems interference is available to process the quantum states. We formalize the use of interference by the definition of a simple class of operations which include linear-optical elements, auxiliary states and conditional operations.We investigate an important subclass of these tools, namely linear-optical elements and auxiliary modes in the vacuum state. For these tools, we are able to extend a previous qualitative result, a no-go theorem for perfect Bell-state analyzer on two qubits in polarization …
-
Experimental time-reversed adaptive Bell measurement towards all-photonic quantum repeatersYasushi Hasegawa, R. Ikuta, N. Matsuda et al. · 2019 · Nature Communications · cited 59 times · Not summarized yet
Experimental time-reversed adaptive Bell measurement towards all-photonic quantum repeaters demonstrates an optical Bell measurement intended for all-photonic repeaters.
Abstract
An all-optical network is identified as a promising infrastructure for fast and energy-efficient communication. Recently, it has been shown that its quantum version based on ‘all-photonic quantum repeaters’—inheriting, at least, the same advantages—expands its possibility to the quantum realm, that is, a global quantum internet with applications far beyond the conventional Internet. Here we report a proof-of-principle experiment for a key component for the all-photonic repeaters—called all-photonic time-reversed adaptive (TRA) Bell measurement, with a proposal for the implementation. In particular, our TRA measurement—based only on optical devices without any quantum memories and any quantum…
Go further
How are these papers found?
We compare the title and abstract of this paper with those of every paper summarized on this site, and with the papers Semantic Scholar recommends, those it cites and those citing it (for a much-cited paper, its most recent citations and, from OpenAlex, the most cited ones). Among the prior work and the follow-ups, the papers that use each other in depth, a method it uses and the much-cited follow-ups come a little higher. The levels (very close, close, related) come from the similarity of the texts, not from a judgment of quality; * marks a paper without an abstract, compared by its title. The sentence under a paper is written by an AI from the two abstracts: check it in the papers. A paper marked not relevant by three readers leaves the list.
Updated on 10 November 2026.
Disclaimer: The AI-based summarization tool and virtual assistant provided on this website may not always provide accurate and complete summaries or responses. We encourage you to carefully review and evaluate the generated content to ensure its quality and relevance to your needs.