Running summarizing tools on a new article

Check the paper below, then start its synthesis.


ECG-LPWAN based for Real-time monitoring Patient’s Heart Beat Status

Puput Dani Prasetyo Adi (National Research and Innovation Agency), Nunuk Indarti (Universitas PGRI Wiranegara), Yuyu Wahyu (National Research and Innovation Agency), Budi Agung Sudarmanto (National Research and Innovation Agency), Fransiska Sisilia Mukti (Institut Teknologi dan Bisnis Asia Malang), Jumadi Mabe Parenreng (State University of Makassar), Hastangka (National Research and Innovation Agency)

International Seminar on Application for Technology of Information and Communication (iSemantic)
License: not stated (all rights reserved)

Abstract: In this study, the ECG Sensor was monitored using IoT based on LoRa 915 MHz to monitor a Patient's, Heart Beat Status. Electrocardiogram or ECG is essential to determine normal or abnormal heart conditions. Can determine the heart rate (bpm) tachycardia or bradycardia. In this research, the ECG output is displayed on the Graphical User Interface (GUI) or Application Server Thingspeak explicitly used for Internet of Things (IoT) Applications. Moreover, the Dragino LoRa 915 MHz LoRa and the Dragino LoRa 915 MHz Gateway transmit ECG data to the internet. Therefore, the doctors and patients can quickly receive ECG data in real-time everywhere in Long-range conditions. LoRa Receive Signal Strength (RSS) will be tested at a certain distance in decibel meters (dBm) and in non-Line-ofSight (Non-LoS) conditions in densely populated areas, analysis of possible Packet Loss, Bandwidth, Spreading Factor (SF), Chirps Spread Spectrum (CSS), Packet Delivery Ratio (PDR), Receive Signal Strength Indicator (RSSI), and analysis of data throughput from LoRa communication with a server, and Bit Rate Error (%) analysis generated by LoRa 915 MHz on IoT design structures.

Published on 17 Sep. 2022