Running summarizing tools on a new article
Check the paper below, then start its synthesis.
Inverse Design for Nonplanar Conformal Layers
Arjun Khurana, Michael J. Probst, Stephen E. Ralph
Abstract: Conformal layering, where a deposited layer follows the nonplanar topography beneath it, arises from both deliberate passivation overlays and imperfect planarization between depositions. However, inverse design methods typically model planar, vertically extruded layers, resulting in geometric discrepancies between the modeled and fabricated structure. To address these discrepancies, we present differentiable mapping functions that incorporate both uniform conformal overlays and partially conformal interlayer dips into a standard inverse design paradigm, requiring no additional design parameters over planar structures. Using these mappings, we design (1) mode-selective GaAs grating reflectors with uniform conformal SiN passivation for high-aspect-ratio VCSELs, reaching differential modal reflectivities of 33.1% (single-etch) and 63.4% (dual-etch), and (2) a dual-layer silicon grating coupler whose upper layer dips up to 40 nm into the lower layer, reaching -0.75 dB coupling efficiency. Modeling conformal layering during optimization, rather than treating it as post-hoc fabrication error, permits direct exploitation of the conformal layering, yielding inherently fabricable and performant designs.