Results of the summarizing process for the arXiv paper: 2201.05996v1

Tariq M Khan presents a hardware implementation of a multimodal biometric system that leverages the parallelism inherent in the system. The proposed system combines two biometric traits, fingerprint and iris, using a classical fusion technique at the matching-score level. By optimizing each biometric trait at the software level to address issues affecting False Acceptance Rate (FAR) and False Rejection Rate (FRR), the author achieves promising results with a FAR of 1.97% and FRR of 12.79%. The study highlights the importance of iris recognition over fingerprint recognition due to higher accuracy rates in literature. To reflect this, a weightage of 0.4 is assigned to fingerprint and 0.6 to iris in the fusion process. The hardware implementation utilizes a low-cost Cyclone IV GX P4CGX150F31 FPGA, combining an Intel embedded processor with an Altera Cyclone IV GX FPGA for efficient software-hardware co-designs. Detailed analysis of hardware resource utilization reveals that the proposed iris recognition system consumes approximately 12K logic elements, accounting for only 12% of total logic elements available, and about 10% logic registers. In comparison, the fingerprint recognition system consumes more logic cells and registers but less memory bits than the iris recognition due to differences in image processing requirements. Overall, this study contributes to advancing multimodal biometric systems by presenting a novel hardware architecture that effectively integrates fingerprint and iris traits for enhanced security applications.

• - Tariq M Khan presents a hardware implementation of a multimodal biometric system combining fingerprint and iris traits.
• - The system optimizes each biometric trait at the software level to address False Acceptance Rate (FAR) and False Rejection Rate (FRR) issues.
• - Promising results are achieved with a FAR of 1.97% and FRR of 12.79%.
• - Iris recognition is highlighted as more accurate than fingerprint recognition in literature, leading to a weightage of 0.4 for fingerprint and 0.6 for iris in the fusion process.
• - Hardware implementation uses a low-cost Cyclone IV GX P4CGX150F31 FPGA for efficient software-hardware co-designs.
• - The proposed iris recognition system consumes approximately 12K logic elements, accounting for only 12% of total logic elements available, and about 10% logic registers.
• - Fingerprint recognition consumes more logic cells and registers but less memory bits than iris recognition due to differences in image processing requirements.
• - The study contributes to advancing multimodal biometric systems by presenting a novel hardware architecture integrating fingerprint and iris traits for enhanced security applications.

Summary1. Tariq M Khan made a special system that uses both fingerprints and eye patterns to check who someone is. 2. The system makes sure it doesn't make mistakes by adjusting how it reads each trait to avoid letting the wrong person in or keeping the right person out. 3. The results were good, with only a few mistakes happening - 1.97% for letting in the wrong person and 12.79% for not letting in the right person. 4. Eye patterns are better at being accurate than fingerprints, so they count more when deciding if someone can come in. 5. The special computer chip used to run this system is cheap but works well because it was designed carefully to use both software and hardware effectively. Definitions- Biometric: A way of identifying people based on unique physical characteristics like fingerprints or eye patterns. - Traits: Distinct features or qualities that help recognize something or someone. - Software: Programs and instructions that tell computers what to do. - Hardware: Physical parts of a computer system that you can touch, like chips or wires. - FPGA (Field Programmable Gate Array): A type of computer chip that can be programmed after being manufactured for specific tasks.

Introduction: Biometric systems have become an essential part of our daily lives, from unlocking our smartphones to accessing secure facilities. These systems use unique physical or behavioral characteristics of individuals, such as fingerprints, iris patterns, and facial features, for identification and authentication purposes. However, relying on a single biometric trait can lead to false acceptance or rejection rates due to various factors like environmental conditions and image quality. To address this issue, Tariq M Khan presents a hardware implementation of a multimodal biometric system that combines two biometric traits – fingerprint and iris. Overview of the Research Paper: The research paper titled "Hardware Implementation of Multimodal Biometric System using Fingerprint and Iris Traits" by Tariq M Khan focuses on leveraging the parallelism inherent in multimodal biometrics for enhanced security applications. The proposed system utilizes a classical fusion technique at the matching-score level to combine fingerprint and iris traits. By optimizing each trait at the software level to address False Acceptance Rate (FAR) and False Rejection Rate (FRR), promising results are achieved with a FAR of 1.97% and FRR of 12.79%. Importance of Iris Recognition over Fingerprint Recognition: The study highlights the importance of iris recognition over fingerprint recognition due to higher accuracy rates in literature. This is reflected in the weightage assigned during the fusion process – 0.4 for fingerprint and 0.6 for iris. Hardware Implementation: To achieve efficient software-hardware co-designs, the hardware implementation utilizes a low-cost Cyclone IV GX P4CGX150F31 FPGA which combines an Intel embedded processor with an Altera Cyclone IV GX FPGA. This allows for faster processing speeds while keeping costs low. Detailed Analysis: The research paper provides detailed analysis on hardware resource utilization for both fingerprint and iris recognition systems implemented on the FPGA platform. It is found that the proposed iris recognition system consumes approximately 12K logic elements, accounting for only 12% of total logic elements available, and about 10% logic registers. In comparison, the fingerprint recognition system consumes more logic cells and registers but less memory bits than the iris recognition due to differences in image processing requirements. Conclusion: The research paper presents a novel hardware architecture for multimodal biometric systems that effectively integrates fingerprint and iris traits. By optimizing each trait at the software level and utilizing efficient hardware resources, promising results are achieved with low FAR and FRR rates. This study contributes to advancing multimodal biometric systems by addressing issues of accuracy and reliability through a parallel approach. The proposed system has potential applications in various security domains such as access control, border control, and forensic investigations. Further research can be conducted to explore the integration of other biometric traits into this hardware architecture for even more robust security solutions. In conclusion, Tariq M Khan's research paper provides valuable insights into the implementation of a multimodal biometric system using fingerprint and iris traits. The use of a classical fusion technique at the matching-score level along with optimized software algorithms leads to improved accuracy rates while leveraging parallelism inherent in these two traits. The hardware implementation on an FPGA platform further enhances efficiency while keeping costs low. This study contributes towards enhancing security measures through advanced biometric systems and opens up avenues for future research in this field.