Results of the summarizing process for the arXiv paper: 2401.14852v2

, , , , Predictive modeling is crucial for understanding physico-chemical processes and potential challenges for scale-up in CO2 storage sites. One significant issue that can arise is dramatic injectivity decline due to salt precipitation pore clogging in high-salinity reservoirs, even over a short period. This study specifically focuses on investigating the adverse impact of CO2-induced salt crystallization in porous media on the geomechanical properties of near-wellbore reservoir sandstones. The research begins with a comprehensive review of CO2 chemo-mechanical interactions with sandstones, recognizing that the impact of salt precipitation cannot be isolated from the precursor effects of interaction with CO2 and carbonic acid. Laboratory experiments were conducted involving geochemical CO2-brine-rock interactions at elevated pressures and temperatures using two sets of porous sandstone with different petrophysical qualities. Two paths were followed in the experimentation process: first, treatment with CO2-acidified brine at 10 MPa fluid pressure and 60°C for 7 days; second, a continuation subset involving supercritical injection until complete dry-out and salt precipitation. Subsequently, core samples underwent testing in a triaxial apparatus at varying stresses and temperatures to evaluate their elastic moduli. The results revealed that salt-affected specimens exhibited up to a 50 percent reduction in Young's and shear moduli, along with twice the increase in Poisson's ratio compared to their intact condition. Notably, the deterioration was more pronounced in tighter rocks with higher initial stiffness. This study provides valuable insights into the potential 50% strength decline observed in near-wellbore reservoir sandstones due to salt precipitation and weak acid interaction during subsurface CO2 injection.

• - Predictive modeling is crucial for understanding physico-chemical processes and potential challenges for scale-up in CO2 storage sites.
• - Dramatic injectivity decline can occur due to salt precipitation pore clogging in high-salinity reservoirs, even over a short period.
• - The study investigates the adverse impact of CO2-induced salt crystallization on the geomechanical properties of near-wellbore reservoir sandstones.
• - Laboratory experiments involved geochemical CO2-brine-rock interactions at elevated pressures and temperatures using two sets of porous sandstone with different petrophysical qualities.
• - Salt-affected specimens exhibited up to a 50% reduction in Young's and shear moduli, along with twice the increase in Poisson's ratio compared to their intact condition.

Summary1. Predictive modeling helps us understand how things work and what problems we might face when storing CO2 underground. 2. Sometimes, when there is too much salt in the ground where we store CO2, it can block the pores and make it hard for the CO2 to go in. 3. This study looks at how salt crystals formed by CO2 can change the strength of rocks near where we inject the CO2. 4. Scientists did experiments in labs to see how CO2, salty water, and rocks react under high pressure and heat using different types of sandstone. 5. Rocks with salt on them became weaker and more flexible compared to rocks without salt. Definitions- Predictive modeling: Using information to guess what might happen in the future. - Physico-chemical processes: How physical things (like rocks) interact with chemicals (like CO2). - Scale-up: Making something bigger or expanding it. - Injectivity decline: The ability for a substance to be injected decreases over time. - Salt precipitation pore clogging: Salt forming and blocking small holes in rocks. - Geomechanical properties: How strong or stable rocks are under pressure or stress. - Petrophysical qualities: Characteristics related to how rocks hold fluids like oil or water. - Young's modulus: A measure of how stiff a material is under tension or stretching forces. - Shear modulus: A measure of a material's resistance to being deformed by shear stress (forces that push parts of

Introduction

Predictive modeling is crucial for understanding the physico-chemical processes and potential challenges for scale-up in CO2 storage sites. One significant issue that can arise is dramatic injectivity decline due to salt precipitation pore clogging in high-salinity reservoirs, even over a short period. This study specifically focuses on investigating the adverse impact of CO2-induced salt crystallization in porous media on the geomechanical properties of near-wellbore reservoir sandstones.

The Importance of Predictive Modeling in CO2 Storage

CO2 storage has been identified as one of the key solutions to mitigate greenhouse gas emissions and combat climate change. However, successful implementation of this technology requires a thorough understanding of the complex interactions between CO2, brine, and rock formations. Predictive modeling plays a crucial role in this process by simulating various scenarios and predicting potential challenges that may arise during subsurface injection.

The Impact of Salt Precipitation on Injectivity Decline

One major challenge faced during CO2 storage is injectivity decline due to salt precipitation pore clogging. This occurs when injected CO2 reacts with brine present in the reservoir, leading to the formation of salts that can block pores and reduce permeability. This not only affects injectivity but also hinders efficient migration and trapping of CO2 within the reservoir.

Previous Research on Chemo-Mechanical Interactions with Sandstones

To understand the impact of salt precipitation on geomechanical properties, it is essential to first review previous research on chemo-mechanical interactions with sandstones. These studies have shown that while salt precipitation cannot be isolated from other precursor effects such as interaction with carbonic acid, it can significantly affect rock strength and stiffness.

Methodology

The researchers conducted laboratory experiments involving geochemical CO2-brine-rock interactions at elevated pressures and temperatures. Two sets of porous sandstone with different petrophysical qualities were used in the experiments. The first set was treated with CO2-acidified brine at 10 MPa fluid pressure and 60°C for 7 days, while the second set underwent a continuation subset involving supercritical injection until complete dry-out and salt precipitation.

Testing Procedures

After the treatment process, core samples were tested in a triaxial apparatus at varying stresses and temperatures to evaluate their elastic moduli. This involved subjecting the samples to axial stress while measuring changes in strain along different directions.

Results

The results of the testing revealed that salt-affected specimens exhibited up to a 50 percent reduction in Young's and shear moduli compared to their intact condition. Additionally, there was also twice the increase in Poisson's ratio observed in these samples. It is worth noting that this deterioration was more pronounced in tighter rocks with higher initial stiffness.

Implications of Results

This study provides valuable insights into the potential strength decline observed in near-wellbore reservoir sandstones due to salt precipitation and weak acid interaction during subsurface CO2 injection. These findings highlight the importance of considering chemo-mechanical interactions when designing CO2 storage projects, especially in high-salinity reservoirs.

Conclusion

In conclusion, this research paper sheds light on an important aspect of CO2 storage – the impact of salt precipitation on geomechanical properties of near-wellbore reservoir sandstones. The study highlights how injectivity decline can occur due to pore clogging caused by salt formation during subsurface injection. By understanding these processes through predictive modeling and laboratory experiments, we can better design and implement successful CO2 storage projects that are both safe and effective for mitigating greenhouse gas emissions.