The CCD Controller and Detector

AI-generated keywords: CCD Telescope Characterization Readout Noise Procurement

AI-generated Key Points

The license of the paper does not allow us to build upon its content and the key points are generated using the paper metadata rather than the full article.

  • The Italian National Telescope "Galileo" (TNG) uses charge-coupled devices (CCDs) as detectors for all its scientific instruments, tracking systems, and Shack-Hartmann wavefront systems.
  • To optimize the performance of these instruments, CCDs that can be driven by controllers with very low readout noise levels are essential.
  • Characterizing detectors is fundamental when they are used in scientific instrumentation.
  • Various CCDs have been assembled in cryostats and tested at a laboratory to select the most suitable detector for TNG's optical instruments.
  • The commissioning at the telescope has also been carried out and work is still ongoing.
  • Authors of this paper include G. Bonano, C. Bonoli, F. Bortoletto, P. Bruno, M. Comari, R. Cosentino, M. D'Alessandro, D. Fantinel, E. Giro and S.Scuderi who provide an overview of the importance of CCD procurement and characterization for scientific instrumentation purposes.
  • Careful selection and testing can lead to optimal performance from these detectors when used in conjunction with appropriate controllers designed to minimize readout noise levels during data acquisition processes at TNG's observatory facilities.
Also access our AI generated: Comprehensive summary, Lay summary, Blog-like article; or ask questions about this paper to our AI assistant.

Authors: G. Bonano, C. Bonoli, F. Bortoletto, P. Bruno, M. Comari, R. Cosentino, M. D'Alessandro, D. Fantinel, E. Giro, S. Scuderi

Scientific dedication of the "Telescopio Nazionale Galileo - proc. CNNA-INAF Meeting - 2000 p.114
arXiv: 2302.11226v1 - DOI (astro-ph.IM)
15 pages

Abstract: All the scientific instruments of the Italian National Telescope "Galileo" (TNG). as well as the tracking systems and the Shack-Hartmann wavefront systems use CCDs as detectors. The CCD procurement is crucial to optimize the instruments performance, and, of course, equal importance assumes the design and realization of controllers able to drive various kinds of CCDs with a very low readout noise. Detectors characterization is of fundamental importance when they have to be used in scientific instrumentation. Various CCDs have been assembled in cryostats and tested at our laboratory in order to select the suitable detector for the optical instruments of the TNG. The relevant phases of the group activity are here described, as well as the commissioning at the telescope and the work that is in progress.

Submitted to arXiv on 22 Feb. 2023

Ask questions about this paper to our AI assistant

You can also chat with multiple papers at once here.

The license of the paper does not allow us to build upon its content and the AI assistant only knows about the paper metadata rather than the full article.

AI assistant instructions?

Results of the summarizing process for the arXiv paper: 2302.11226v1

This paper's license doesn't allow us to build upon its content and the summarizing process is here made with the paper's metadata rather than the article.

The Italian National Telescope "Galileo" (TNG) relies on charge-coupled devices (CCDs) as detectors for all its scientific instruments, tracking systems, and Shack-Hartmann wavefront systems. To optimize the performance of these instruments, it is essential to acquire CCDs that can be driven by controllers with very low readout noise levels. Therefore, the design and realization of such controllers are equally important. Characterizing detectors is fundamental when they are used in scientific instrumentation. To select the most suitable detector for TNG's optical instruments, various CCDs have been assembled in cryostats and tested at a laboratory. The relevant phases of this group activity are described in detail in this paper. The commissioning at the telescope has also been carried out and work is still ongoing. The authors of this paper include G. Bonano, C. Bonoli, F. Bortoletto, P. Bruno, M. Comari, R. Cosentino, M. D'Alessandro, D. Fantinel, E. Giro and S.Scuderi who provide an overview of the importance of CCD procurement and characterization for scientific instrumentation purposes. This paper highlights how careful selection and testing can lead to optimal performance from these detectors when used in conjunction with appropriate controllers designed to minimize readout noise levels during data acquisition processes at TNG's observatory facilities.
Created on 04 Apr. 2023

Assess the quality of the AI-generated content by voting

Score: 0

Why do we need votes?

Votes are used to determine whether we need to re-run our summarizing tools. If the count reaches -10, our tools can be restarted.

Similar papers summarized with our AI tools

Navigate through even more similar papers through a

tree representation

Look for similar papers (in beta version)

By clicking on the button above, our algorithm will scan all papers in our database to find the closest based on the contents of the full papers and not just on metadata. Please note that it only works for papers that we have generated summaries for and you can rerun it from time to time to get a more accurate result while our database grows.

Disclaimer: The AI-based summarization tool and virtual assistant provided on this website may not always provide accurate and complete summaries or responses. We encourage you to carefully review and evaluate the generated content to ensure its quality and relevance to your needs.