A Lightweight Space-based Solar Power Generation and Transmission Satellite

AI-generated keywords: Space-based Solar Power Modular Configuration CMOS Integrated Circuits Phased Array Rectennas

AI-generated Key Points

  • Researchers led by Behrooz Abiri propose a new design for a space-based solar power array
  • Design uses modular configuration of small, repeatable unit cells called tiles
  • Tiles individually perform power collection, conversion and transmission
  • Sunlight is collected via lightweight parabolic concentrators and converted to DC electric power with high efficiency III-V photovoltaics
  • Several CMOS integrated circuits within each tile generate and control the phase of multiple independently-controlled microwave sources using the DC power
  • Sources are coupled to multiple radiating antennas that act as elements of a large phased array to beam the RF power to Earth at a frequency chosen in the range of 1-10 GHz
  • The resulting satellite has no movable parts once it is fully deployed and all beam steering is done electronically
  • Design achieves significantly reduced mass compared to previous designs by taking advantage of solar concentration, current CMOS integrated circuit technology and ultralight structural elements.
  • Safe, scalable and able to be deployed and tested with progressively larger configurations starting with a single unit cell that could fit on a cube satellite.
  • Areal mass density of 160 g/m2 and an end-to-end efficiency of 7-14%
  • Innovative approach could revolutionize energy production on Earth by providing clean energy from space without relying on fossil fuels or other non-renewable resources.
Also access our AI generated: Comprehensive summary, Lay summary, Blog-like article; or ask questions about this paper to our AI assistant.

Authors: Behrooz Abiri, Manan Arya, Florian Bohn, Austin Fikes, Matan Gal-Katziri, Eleftherios Gdoutos, Ashish Goel, Pilar Espinet Gonzalez, Michael Kelzenberg, Nicolas Lee, Michael A. Marshall, Tatiana Roy, Fabien Royer, Emily C. Warmann, Nina Vaidya, Tatiana Vinogradova, Richard Madonna, Harry Atwater, Ali Hajimiri, Sergio Pellegrino

arXiv: 2206.08373v2 - DOI (astro-ph.IM)
License: CC BY-NC-SA 4.0

Abstract: We propose a novel design for a lightweight, high-performance space-based solar power array combined with power beaming capability for operation in geosynchronous orbit and transmission of power to Earth. We use a modular configuration of small, repeatable unit cells, called tiles, that each individually perform power collection, conversion, and transmission. Sunlight is collected via lightweight parabolic concentrators and converted to DC electric power with high efficiency III-V photovoltaics. Several CMOS integrated circuits within each tile generates and controls the phase of multiple independently-controlled microwave sources using the DC power. These sources are coupled to multiple radiating antennas which act as elements of a large phased array to beam the RF power to Earth. The power is sent to Earth at a frequency chosen in the range of 1-10 GHz and collected with ground-based rectennas at a local intensity no larger than ambient sunlight. We achieve significantly reduced mass compared to previous designs by taking advantage of solar concentration, current CMOS integrated circuit technology, and ultralight structural elements. Of note, the resulting satellite has no movable parts once it is fully deployed and all beam steering is done electronically. Our design is safe, scalable, and able to be deployed and tested with progressively larger configurations starting with a single unit cell that could fit on a cube satellite. The design reported on here has an areal mass density of 160 g/m2 and an end-to-end efficiency of 7-14%. We believe this is a significant step forward to the realization of space-based solar power, a concept once of science fiction.

Submitted to arXiv on 16 Jun. 2022

Ask questions about this paper to our AI assistant

You can also chat with multiple papers at once here.

AI assistant instructions?

Results of the summarizing process for the arXiv paper: 2206.08373v2

A team of researchers led by Behrooz Abiri has proposed a novel design for a lightweight, high-performance space-based solar power array that can transmit power to Earth. The design uses a modular configuration of small, repeatable unit cells called tiles, which individually perform power collection, conversion and transmission. Sunlight is collected via lightweight parabolic concentrators and converted to DC electric power with high efficiency III-V photovoltaics. Several CMOS integrated circuits within each tile generate and control the phase of multiple independently-controlled microwave sources using the DC power. These sources are coupled to multiple radiating antennas that act as elements of a large phased array to beam the RF power to Earth at a frequency chosen in the range of 1-10 GHz. The power is then collected with ground-based rectennas at a local intensity no larger than ambient sunlight. The proposed design achieves significantly reduced mass compared to previous designs by taking advantage of solar concentration, current CMOS integrated circuit technology and ultralight structural elements. Notably, the resulting satellite has no movable parts once it is fully deployed and all beam steering is done electronically. The design is safe, scalable and able to be deployed and tested with progressively larger configurations starting with a single unit cell that could fit on a cube satellite. The research team believes this design represents a significant step forward in realizing space-based solar power - once considered science fiction - with an areal mass density of 160 g/m2 and an end-to-end efficiency of 7-14%. This innovative approach could revolutionize energy production on Earth by providing clean energy from space without relying on fossil fuels or other non-renewable resources.
Created on 07 Apr. 2023

Assess the quality of the AI-generated content by voting

Score: 0

Why do we need votes?

Votes are used to determine whether we need to re-run our summarizing tools. If the count reaches -10, our tools can be restarted.

Similar papers summarized with our AI tools

Navigate through even more similar papers through a

tree representation

Look for similar papers (in beta version)

By clicking on the button above, our algorithm will scan all papers in our database to find the closest based on the contents of the full papers and not just on metadata. Please note that it only works for papers that we have generated summaries for and you can rerun it from time to time to get a more accurate result while our database grows.

Disclaimer: The AI-based summarization tool and virtual assistant provided on this website may not always provide accurate and complete summaries or responses. We encourage you to carefully review and evaluate the generated content to ensure its quality and relevance to your needs.