A Possible Explanation for the Blue Spectral Slope Observed on B-type Asteroids

AI-generated keywords: Dark material Reflectance spectrum Carbonaceous asteroids Laboratory experiments Scanning electron microscopy

AI-generated Key Points

  • Researchers aimed to understand the role of dark material in the reflectance spectrum of carbonaceous asteroids
  • Laboratory experiments were conducted using relevant dark materials such as graphite, magnetite, and troilite
  • All three dark materials darken the reflectance spectrum of forsterite samples and cause a decrease in spectral slope (become blue)
  • Spectral changes can be caused by both nm- and micron-sized grains
  • Graphite is most efficient at altering the spectral slope in the ultraviolet-visible region, while magnetite is most efficient in the near-infrared
  • Troilite alters the slope and albedo of their samples, suggesting that these spectral changes may not be unique to graphite and magnetite alone
  • Scanning electron microscopy was performed on each dark material to better constrain grain size
  • Synthetic troilite's spectrum was relatively featureless, dark, and positively sloped in the near-infrared region but contained an absorption band centered around 0.35 µm attributed to Fe-S charge transfer and crystal field transitions of Fe2+
  • Mixing experiment showed good agreement with those observed on Bennu which suggests that fine-grained dark material including sulfides present in regolith can cause negative (blue) slopes found on B type asteroids providing insight into their composition and evolution processes
Also access our AI generated: Comprehensive summary, Lay summary, Blog-like article; or ask questions about this paper to our AI assistant.

Authors: Mark J. Loeffler, Beau S. Prince

arXiv: 2201.02459v1 - DOI (astro-ph.EP)
License: CC BY 4.0

Abstract: In an effort to better understand the role dark material plays in the reflectance spectrum of carbonaceous asteroids, we performed laboratory studies focusing on quantifying how the addition of relevant dark material (graphite, magnetite and troilite) can alter the ultraviolet-visible and near-infrared spectrum of a neutral silicate mineral. We find that addition of graphite, magnetite and troilite all darken the reflectance spectrum of our forsterite samples and cause the spectral slope to decrease (become blue). These spectral changes can be caused by both nm- and micron-sized grains. In the ultraviolet-visible region, we find that graphite is most efficient at altering the spectral slope, while in the near-infrared, magnetite is the most efficient. At all wavelengths studied, graphite is the most efficient at darkening our sample spectrum. However, the observation that troilite also alters the slope and albedo of our samples suggests that the spectral changes caused by magnetite and graphite may not be unique. In addition, we find that the spectral slopes in our mixtures compare generally well to what has been observed on Bennu suggesting that a significant portion of fine-grained dark material, including sulfides, present in the regolith can cause the observed negative (blue) slope found on B-type asteroids.

Submitted to arXiv on 07 Jan. 2022

Ask questions about this paper to our AI assistant

You can also chat with multiple papers at once here.

AI assistant instructions?

Results of the summarizing process for the arXiv paper: 2201.02459v1

In this study, the researchers aimed to understand the role of dark material in the reflectance spectrum of carbonaceous asteroids. They conducted laboratory experiments to investigate how the addition of relevant dark materials such as graphite, magnetite, and troilite can alter the ultraviolet-visible and near-infrared spectrum of a neutral silicate mineral. The team found that all three dark materials darken the reflectance spectrum of forsterite samples and cause a decrease in spectral slope (become blue). These spectral changes can be caused by both nm- and micron-sized grains. The researchers observed that graphite is most efficient at altering the spectral slope in the ultraviolet-visible region, while magnetite is most efficient in the near-infrared. However, they also noted that troilite alters the slope and albedo of their samples, suggesting that these spectral changes may not be unique to graphite and magnetite alone. To better constrain grain size, scanning electron microscopy was performed on each dark material. The team made rudimentary estimates of average grain size by counting grains on a given line and dividing by its length. They found that nm-sized graphite powder is darker than other powders used in this study. The absolute reflectance spectra of each component were analyzed. Forsterite had a largely featureless spectrum with an absorption band at lower wavelengths due to low amounts of iron impurities likely present as Fe2+ or Fe3+. Graphite had a relatively featureless, dark, positively sloped spectrum in the near-infrared region with a sharp rise below 0.5 µm due to a Fresnel peak near 0.25 µm caused by strong absorption resulting from π-π* electronic transition. Magnetite had a red and dark overall spectrum containing broad absorption bands near 1 µm as well as weak features centered around 0.55 µm due to Fe2+ and Fe3+. Synthetic troilite's spectrum was relatively featureless, dark, and positively sloped in the near-infrared region but contained an absorption band centered around 0.35 µm attributed to Fe-S charge transfer and crystal field transitions of Fe2+. The researchers also conducted a mixing experiment to simulate how different types of dark materials can affect asteroid surfaces. They poured a known amount of dark material into a glass vial, closed it tightly before shaking it vigorously for one minute before homogenizing it with gentle stirring using a spatula. Comparing their mixtures' spectral slopes with those observed on Bennu showed good agreement which suggests that fine grained dark material including sulfides present in regolith can cause negative (blue) slopes found on B type asteroids providing insight into their composition and evolution processes..
Created on 06 Apr. 2023

Assess the quality of the AI-generated content by voting

Score: 0

Why do we need votes?

Votes are used to determine whether we need to re-run our summarizing tools. If the count reaches -10, our tools can be restarted.

The previous summary was created more than a year ago and can be re-run (if necessary) by clicking on the Run button below.

Similar papers summarized with our AI tools

Navigate through even more similar papers through a

tree representation

Look for similar papers (in beta version)

By clicking on the button above, our algorithm will scan all papers in our database to find the closest based on the contents of the full papers and not just on metadata. Please note that it only works for papers that we have generated summaries for and you can rerun it from time to time to get a more accurate result while our database grows.

Disclaimer: The AI-based summarization tool and virtual assistant provided on this website may not always provide accurate and complete summaries or responses. We encourage you to carefully review and evaluate the generated content to ensure its quality and relevance to your needs.