The GOES-R EUVS Model for EUV Irradiance Variability
AI-generated Key Points
- The GOES-R series of four satellites is the next generation of NOAA GOES satellites.
- They have been launched into orbit and commissioned and renamed GOES 16-19.
- These satellites are equipped with the Extreme Ultraviolet Sensors (EUVS) and X-ray Irradiance Sensors (EXIS) instrument suite which measure calibrated solar irradiance in eight lines or bands between 25 and 285 nm.
- The EUVS measurements from the EXIS instruments are used as inputs to create the EUVS Model, a solar spectral irradiance model for space weather operations that predicts irradiance in twenty-two intervals ranging from five to ten nanometers wide at a cadence of thirty seconds.
- Once fully operational, NOAA will distribute the EUVS Model irradiance with one-minute latency as a primary space weather data product.
- The algorithms used in creating the EUVS Model along with data sources, calibration methods, associated uncertainties, capabilities, and limitations are described in this paper by Thiemann et al.
- The typical model uncertainties are less than approximately five percent for variability at time-scales longer than six hours while being around twenty-five percent for solar flare-induced variability.
- The absolute uncertainties originating from calibrating instruments used to create the EUVS Model is approximately ten percent.
- Examples of model results are presented at both sub-daily and multi-year timescales to demonstrate its capabilities along with modeled example solar flare irradiances.
- The EUVS Model will be a valuable tool for space weather forecasting and monitoring providing critical information to protect infrastructure and human life in space.
Authors: E. M. B. Thiemann, F. G. Eparvier, D. Woodraska, P. C. Chamberlin, J. Machol, T. Eden, A. R. Jones, R. Meisner, S. Mueller, M. Snow, R. Viereck, T. N. Woods
Abstract: The Geostationary Operational Environmental Satellite R (GOES-R) series of four satellites are the next generation NOAA GOES satellites. Once on orbit and commissioned, they are renamed GOES 16-19, making critical terrestrial and space weather measurements through 2035. GOES 16 and 17 are currently on orbit, having been launched in 2016 and 2018, respectively. The GOES-R satellites include the EUV and X-ray Irradiance Sensors (EXIS) instrument suite, which measures calibrated solar irradiance in 8 lines or bands between 25 and 285 nm with the Extreme Ultraviolet Sensors (EUVS) instrument. EXIS also includes the X-Ray Sensor (XRS) instrument, which measures solar soft X-ray irradiance at the legacy GOES bands. The EUVS measurements are used as inputs to the EUVS Model, a solar spectral irradiance model for space weather operations that predicts irradiance in twenty-two 5 nm wide intervals from 5 nm to 115 nm, and one 10 nm wide interval from 117 to 127 nm at 30 second cadence. Once fully operational, NOAA will distribute the EUVS Model irradiance with 1 minute latency as a primary space weather data product, ushering in a new era of rapid dissemination and measurement continuity of EUV irradiance spectra. This paper describes the EUVS Model algorithms, data sources, calibration methods and associated uncertainties. Typical model (relative) uncertainties are less than $\sim$5\% for variability at time-scales longer than 6 hours, and are $\sim$25\% for solar flare induced variability. The absolute uncertainties, originating from the instruments used to calibrate the EUVS Model, are $\sim$10\%. Examples of model results are presented at both sub-daily and multi-year timescales to demonstrate the model's capabilities and limitations. Example solar flare irradiances are also modeled.
Ask questions about this paper to our AI assistant
You can also chat with multiple papers at once here.
Welcome to our AI assistant! Here are some important things to keep in mind:
- The assistant will only answer questions related to this specific paper.
- Please note that this is not a bot for casual chatting.
- If you want the answer in a language other than the language you chose for navigating the website, simply add "TRANSLATE IN LANGUAGE L" at the end of your query (replace "LANGUAGE L" with the language of your choice).
- For example, you could ask "Can you extract the most important aspect of the paper? TRANSLATE IN SPANISH".
- If you want to keep the history of your questions/answers you should create an account.
Assess the quality of the AI-generated content by voting
Why do we need votes?
Votes are used to determine whether we need to re-run our summarizing tools. If the count reaches -10, our tools can be restarted.
Similar papers summarized with our AI tools
Navigate through even more similar papers through atree representation
Look for similar papers (in beta version)
By clicking on the button above, our algorithm will scan all papers in our database to find the closest based on the contents of the full papers and not just on metadata. Please note that it only works for papers that we have generated summaries for and you can rerun it from time to time to get a more accurate result while our database grows.
Disclaimer: The AI-based summarization tool and virtual assistant provided on this website may not always provide accurate and complete summaries or responses. We encourage you to carefully review and evaluate the generated content to ensure its quality and relevance to your needs.