Hydrogen production from polymeric organic solids via atmospheric pressure nonthermal Plasma

AI-generated keywords: Atmospheric Nonthermal Plasma Hydrogen Production Renewable Electricity Plastic Waste Biomass Waste

AI-generated Key Points

  • Doctoral research dissertation focuses on hydrogen production from organic solid feedstocks via atmospheric nonthermal plasma
  • Hydrogen is a sustainable energy carrier with high energy density and no CO$_2$ emissions
  • Low-temperature atmospheric pressure plasma powered by renewable electricity could lead to viable production of green hydrogen
  • Research involves designing, building, and characterizing two low-temperature atmospheric pressure plasma reactors (transarc and glidarc)
  • Both reactors show increasing hydrogen production rate and efficiency with increasing voltage level
  • Transarc reactor achieves maximum hydrogen production efficiency of 0.16 mol/kWh and minimum energy cost of 3100 kWh/kg H$_2$
  • Glidarc reactor achieves maximum hydrogen production efficiency of 0.15 mol/kWh and minimum energy cost of 3300 kWh/kg H$_2$
  • Atmospheric nonthermal plasma technology has potential for producing green hydrogen from organic solid feedstocks
  • Utilizing renewable electricity sources offers a sustainable solution for upcycling plastic and biomass waste while reducing CO$_2$ emissions
Also access our AI generated: Comprehensive summary, Lay summary, Blog-like article; or ask questions about this paper to our AI assistant.

Authors: Benard Tabu

arXiv: 2306.05643v1 - DOI (physics.plasm-ph)
PhD thesis
License: CC BY 4.0

Abstract: The potential of using hydrogen as a sustainable energy carrier is attributed to its high energy density and its utilization without CO$_2$ emissions. Existing technologies mainly produce hydrogen thermochemically via natural gas reforming or electrochemically through water splitting. Organic solid feedstocks rich in hydrogen, such as biomass and plastic waste, are under-utilized for this purpose. Approaches based on low-temperature atmospheric pressure plasma powered by renewable electricity could lead to the production of green hydrogen more viably than current approaches, leading to sustainable alternatives for upcycling plastic and biomass waste. This doctoral research dissertation focuses on the production of hydrogen from solids via atmospheric nonthermal plasma. First, two low-temperature atmospheric pressure plasma reactors, based on transferred arc (transarc) and gliding arc (glidarc) discharges and depicting complementary operational characteristics, are designed, built, and characterized to produce hydrogen from low-density polyethylene (LDPE) as a model plastic waste. Experimental results show that hydrogen production rate and efficiency increase monotonically with increasing voltage level in both reactors. Despite the reactors' markedly different modes of operation, their hydrogen production performance metrics are comparable.

Submitted to arXiv on 09 Jun. 2023

Ask questions about this paper to our AI assistant

You can also chat with multiple papers at once here.

AI assistant instructions?

Results of the summarizing process for the arXiv paper: 2306.05643v1

This doctoral research dissertation focuses on the production of hydrogen from organic solid feedstocks via atmospheric nonthermal plasma. The potential of using hydrogen as a sustainable energy carrier is attributed to its high energy density and its utilization without CO$_2$ emissions. To address this issue, the dissertation explores approaches based on low-temperature atmospheric pressure plasma powered by renewable electricity. These approaches could lead to the production of green hydrogen more viably than current methods, providing sustainable alternatives for upcycling plastic and biomass waste. The research begins by designing, building, and characterizing two low-temperature atmospheric pressure plasma reactors: one based on transferred arc (transarc) discharge and the other based on gliding arc (glidarc) discharge. These reactors depict complementary operational characteristics and are used to produce hydrogen from low-density polyethylene (LDPE) as a model plastic waste. Experimental results show that both reactors exhibit monotonically increasing hydrogen production rate and efficiency with increasing voltage level. Despite their different modes of operation, the reactors demonstrate comparable performance metrics for hydrogen production. The transarc reactor achieves a maximum hydrogen production efficiency of 0.16 mol/kWh and a minimum energy cost of 3100 kWh/kg H$_2$. On the other hand, the glidarc reactor achieves a maximum hydrogen production efficiency of 0.15 mol/kWh and a minimum energy cost of 3300 kWh/kg H$_2$. Overall, this research highlights the potential of atmospheric nonthermal plasma technology for producing green hydrogen from organic solid feedstocks. By utilizing renewable electricity sources, this approach offers a sustainable solution for upcycling plastic and biomass waste while reducing CO$_2$ emissions associated with traditional methods of hydrogen production.
Created on 23 Nov. 2023

Assess the quality of the AI-generated content by voting

Score: 0

Why do we need votes?

Votes are used to determine whether we need to re-run our summarizing tools. If the count reaches -10, our tools can be restarted.

The previous summary was created more than a year ago and can be re-run (if necessary) by clicking on the Run button below.

Similar papers summarized with our AI tools

Navigate through even more similar papers through a

tree representation

Look for similar papers (in beta version)

By clicking on the button above, our algorithm will scan all papers in our database to find the closest based on the contents of the full papers and not just on metadata. Please note that it only works for papers that we have generated summaries for and you can rerun it from time to time to get a more accurate result while our database grows.

Disclaimer: The AI-based summarization tool and virtual assistant provided on this website may not always provide accurate and complete summaries or responses. We encourage you to carefully review and evaluate the generated content to ensure its quality and relevance to your needs.