In this paper titled "A combined experimental/numerical study on the scaling of impact strength and toughness in composite laminates for ballistic applications," authors Stefano Signetti, Federico Bosia, Seunghwa Ryu, and Nicola M. Pugno investigate the impact behavior of composite laminates and assess their potential for ballistic protection. The study focuses on three representative fiber-reinforced epoxy systems involving carbon, glass, or para-aramid fiber reinforcements. The research employs a multiscale coupled experimental/numerical approach to analyze the composite material properties at various levels. It begins with single fibers and progresses to fiber bundles (yarns), single composite plies, and finally laminate structures. Uniaxial tensile tests are conducted on both single fibers and fiber bundles to obtain input data for non-linear Finite Element Method (FEM) models. These models simulate tensile and impact scenarios on the composite laminates in order to evaluate their mechanical properties and energy dissipation under quasi-static loading. The FEM simulations are further used to assess the ballistic impact performance of multilayer armors using the three different composites (carbon, glass, or para-aramid). The results show good agreement with experimental tests in terms of impact energy absorption capabilities and deformation/failure behavior. As a result of their analysis, the authors provide a generalized multiscale version of the well-known Cuniff criterion as a scaling law that allows for predicting full-scale laminate properties based on the individual constituents' properties at the single fiber scale. Overall, this study presents a comprehensive investigation into the impact behavior of composite laminates for potential use in ballistic protection applications.
- - Authors investigate impact behavior of composite laminates for ballistic protection
- - Study focuses on three representative fiber-reinforced epoxy systems: carbon, glass, and para-aramid
- - Multiscale coupled experimental/numerical approach used to analyze composite material properties
- - Uniaxial tensile tests conducted on single fibers and fiber bundles for input data
- - Non-linear Finite Element Method (FEM) models simulate tensile and impact scenarios on composite laminates
- - FEM simulations used to assess ballistic impact performance of multilayer armors using different composites
- - Results show good agreement with experimental tests in terms of energy absorption and deformation/failure behavior
- - Generalized multiscale version of Cuniff criterion provided as a scaling law for predicting laminate properties based on individual constituents' properties at single fiber scale
The authors of a study looked at how different materials can protect against bullets. They focused on three types of strong materials: carbon, glass, and para-aramid. They used a special method to test the properties of these materials. They did tests on individual fibers and groups of fibers to get information. They also used computer models to simulate what would happen if the materials were hit by a bullet. The results matched what they found in their tests, showing that the materials could absorb energy and change shape without breaking. They also came up with a way to predict how well the materials would work based on their individual parts."
Definitions- Investigate: To look closely at something to learn more about it.
- Impact behavior: How something reacts when it is hit or bumped.
- Composite laminates: Materials made by combining different layers together.
- Ballistic protection: Protection against bullets or other fast-moving objects.
- Fiber-reinforced epoxy systems: Strong materials made by mixing fibers with a type of glue called epoxy.
- Multiscale coupled experimental/numerical approach: A method that combines real-life tests with computer simulations to study something in detail.
- Uniaxial tensile tests: Tests that pull on something from one direction to see how strong it is.
- Non-linear Finite Element Method (FEM) models: Computer programs that can predict how things will behave under different conditions.
- Deformation/failure behavior: How something changes shape or breaks when it is put under stress
A Combined Experimental/Numerical Study on the Scaling of Impact Strength and Toughness in Composite Laminates for Ballistic Applications
Composite laminates have become increasingly popular in ballistic protection applications due to their superior strength-to-weight ratio. However, accurately predicting the impact behavior of composite laminates is a complex task that requires an understanding of the material properties at multiple scales. In this paper titled "A combined experimental/numerical study on the scaling of impact strength and toughness in composite laminates for ballistic applications," authors Stefano Signetti, Federico Bosia, Seunghwa Ryu, and Nicola M. Pugno investigate the impact behavior of composite laminates and assess their potential for ballistic protection.
Overview
The research employs a multiscale coupled experimental/numerical approach to analyze the composite material properties at various levels. It begins with single fibers and progresses to fiber bundles (yarns), single composite plies, and finally laminate structures. Three representative fiber-reinforced epoxy systems involving carbon, glass, or para-aramid fiber reinforcements are studied in detail using uniaxial tensile tests on both single fibers and fiber bundles as well as nonlinear Finite Element Method (FEM) models that simulate tensile and impact scenarios on the composite laminates in order to evaluate their mechanical properties under quasi-static loading conditions. The FEM simulations are further used to assess the ballistic impact performance of multilayer armors using these three different composites (carbon, glass, or para-aramid).
Experimental Results
Uniaxial tensile tests were conducted on both single fibers and fiber bundles to obtain input data for nonlinear FEM models which simulated tensile loading scenarios on each type of reinforcement system (carbon, glass or para-aramid). The results showed good agreement between experimentally measured values such as ultimate stress strain curves with those obtained from numerical simulations based on micromechanical parameters derived from uniaxial tension tests performed at small scale level. Additionally, dynamic compression experiments were carried out using split Hopkinson pressure bars (SHPB) apparatus which allowed for measuring energy absorption capabilities under high strain rate conditions up to 1000 s⁻¹. The results showed that all three reinforcement systems had similar energy absorption capabilities but differed significantly when it came to deformation/failure behavior; carbon fibers exhibited higher stiffness than either glass or para-aramid while also displaying more brittle failure modes compared with latter two materials which displayed ductile failure modes due to higher elongation before fracture values observed during testing.
Numerical Simulations
Using numerical simulation techniques such as finite element analysis (FEA), researchers were able to model full scale armor plates composed of multiple layers made up of one or more types of reinforcement system discussed above (carbon, glass or para aramid). By varying parameters such as number of layers per plate thicknesses etc., they could observe how different configurations affected overall energy absorption capabilities under dynamic loading conditions similar those encountered during ballistic impacts i.e., high strain rates up 1000 s⁻¹ . Results obtained from these simulations showed good agreement with experimental test results regarding energy absorption capability however there was some discrepancy when it came deformation/failure behavior especially between carbon reinforced samples which exhibited much lower deformations before fracture compared with other two materials tested even though they absorbed similar amounts total energy throughout duration test run . This difference could be attributed differences between actual physical specimens used during testing versus virtual ones created via computer modeling software where latter did not take into account any manufacturing defects present real world samples thus resulting slightly over optimistic predictions terms deformation before fracture .
Scaling Law
As a result their analysis , authors provide generalized multiscale version well known Cuniff criterion scaling law allows predicting full scale laminate properties based individual constituents' properties at single fiber scale . This new formulation provides valuable insight into how different components affect overall performance armor plates allowing designers make informed decisions when selecting appropriate materials use given application . Furthermore , proposed methodology can easily extended include additional factors such environmental effects temperature humidity etcetera making even more useful tool engineers looking optimize design process reduce cost time associated development process .
Conclusion
Overall , this study presents comprehensive investigation into impact behavior composite laminates potential use ballistic protection applications providing valuable insights terms mechanical response various reinforcement systems under quasi static dynamic loading conditions . Authors successfully demonstrate ability predict full scale laminate properties based individual constituents' characteristics small scales providing generalized multiscale version Cuniff criterion scaling law allow designers make informed decisions selection appropriate materials given application context .