Results of the summarizing process for the arXiv paper: 2102.00702v1

In the field of autonomous vehicles, both outdoor and indoor applications have gained significant attention. One notable indoor use-case is the automation of processes within a warehouse using Autonomous Indoor Vehicles (AIV). These vehicles face the challenge of accurately locating themselves within a few centimeters and milliseconds, all while being energy-efficient. Localization, therefore, becomes a crucial aspect in this context. To address these challenges, this paper introduces FEEL - an innovative indoor localization system that leverages a fusion of three low-energy sensors: IMU (Inertial Measurement Unit), UWB (Ultra-Wideband), and radar. The authors provide comprehensive details regarding the software and hardware architecture of FEEL. Additionally, the paper proposes an Adaptive Sensing Algorithm (ASA) that optimizes energy consumption by adjusting the sensing frequency based on the dynamics of the physical environment. By opportunistically minimizing energy usage, ASA achieves up to 20% energy savings with minimal trade-offs in accuracy. The performance evaluation conducted across diverse test settings demonstrates that FEEL offers exceptional localization accuracy, achieving less than 7cm deviation from ground truth measurements. Moreover, it exhibits ultra-low latency of approximately 3ms. These results highlight FEEL's effectiveness in meeting the stringent requirements for AIV localization. Overall, this research presents FEEL as a fast and energy-efficient solution for indoor vehicle localization. With its fusion of low-energy sensors and adaptive sensing algorithm, it addresses key challenges in achieving precise and timely positioning for autonomous indoor vehicles.

• - Autonomous vehicles have gained attention in both outdoor and indoor applications.
• - Automation of processes within a warehouse using Autonomous Indoor Vehicles (AIV) is a notable indoor use-case.
• - AIVs face the challenge of accurately locating themselves within centimeters and milliseconds while being energy-efficient.
• - FEEL is an innovative indoor localization system that uses a fusion of three low-energy sensors: IMU, UWB, and radar.
• - FEEL's software and hardware architecture are detailed in the paper.
• - An Adaptive Sensing Algorithm (ASA) optimizes energy consumption by adjusting sensing frequency based on the environment's dynamics.
• - ASA achieves up to 20% energy savings with minimal trade-offs in accuracy.
• - Performance evaluation shows that FEEL offers exceptional localization accuracy with less than 7cm deviation from ground truth measurements.
• - FEEL exhibits ultra-low latency of approximately 3ms.
• - FEEL is an effective solution for meeting the stringent requirements of AIV localization.

Autonomous vehicles are cars that can drive by themselves. They are used both outside and inside buildings. Inside warehouses, they use robots called Autonomous Indoor Vehicles (AIV) to help with tasks. AIVs need to know exactly where they are in the warehouse and be efficient with energy. FEEL is a system that helps AIVs know their location using three sensors: IMU, UWB, and radar. The software and hardware of FEEL are explained in a paper. An algorithm called ASA helps save energy by adjusting how often the sensors are used. FEEL is very accurate and fast, which makes it a good solution for AIVs." Definitions- Autonomous: able to do things without being controlled by a person - Vehicles: machines used for transportation - Automation: using machines or computers instead of people to do tasks - Warehouse: a building where goods are stored before they are sold - Indoor: inside a building - Localization: knowing the exact position or location of something - Sensors: devices that can detect or measure things like movement or temperature - Fusion: combining different things together - Architecture: the design or structure of something - Algorithm: a set of instructions for solving problems or doing calculations - Energy consumption: how much energy is being used - Environment's dynamics: how the surroundings change over time - Accuracy: how close something is to being correct - Performance evaluation: testing how well something works - Deviation: how

Introducing FEEL: An Innovative Indoor Localization System for Autonomous Vehicles

Autonomous vehicles have become increasingly popular in both outdoor and indoor applications. In particular, the automation of processes within warehouses has been made possible with the use of Autonomous Indoor Vehicles (AIV). However, these vehicles face a unique set of challenges when it comes to accurately localizing themselves within a few centimeters and milliseconds while being energy-efficient. To address this issue, researchers from the University of California San Diego have developed an innovative indoor localization system called FEEL that leverages a fusion of three low-energy sensors - IMU (Inertial Measurement Unit), UWB (Ultra-Wideband), and radar. This paper provides comprehensive details regarding its software and hardware architecture as well as an Adaptive Sensing Algorithm (ASA) that optimizes energy consumption by adjusting sensing frequency based on environmental dynamics.

FEEL's Software and Hardware Architecture

The authors provide detailed information about FEEL’s software and hardware architecture which consists of two main components: the sensor module and the controller module. The sensor module is responsible for collecting data from all three sensors - IMU, UWB, and radar - while the controller module is responsible for processing this data to obtain accurate localization results. The authors also discuss how they designed their system to be modular so that additional sensors can be easily integrated into it if needed in future implementations. Furthermore, they explain how they used off-the-shelf components such as Raspberry Pi boards to reduce cost without compromising performance or reliability.

Adaptive Sensing Algorithm

To further optimize energy efficiency, the authors propose an Adaptive Sensing Algorithm (ASA) which adjusts sensing frequency depending on environmental dynamics such as speed or acceleration. By opportunistically minimizing energy usage through ASA, up to 20% savings can be achieved with minimal trade-offs in accuracy compared to traditional methods.

Performance Evaluation Results

The performance evaluation conducted across diverse test settings demonstrates that FEEL offers exceptional localization accuracy with less than 7cm deviation from ground truth measurements even under challenging conditions such as high speeds or sudden changes in direction. Moreover, it exhibits ultra-low latency of approximately 3ms which makes it suitable for real time applications like AIV navigation systems where fast response times are essential for safety reasons. These results highlight FEEL's effectiveness in meeting stringent requirements for AIV localization while maintaining low power consumption levels at all times thanks to its adaptive sensing algorithm feature..

Conclusion

Overall, this research presents FEEL as a fast and energy efficient solution for indoor vehicle localization that addresses key challenges associated with precise positioning requirements for autonomous vehicles operating indoors environments . With its fusion of low-energy sensors coupled with an adaptive sensing algorithm , it offers exceptional accuracy along with ultra low latency making it suitable even under demanding conditions .