Results of the summarizing process for the arXiv paper: 2002.08089v1

In the realm of power system networks, Distributed Generation (DG) units play a crucial role in enhancing the overall architecture and efficiency of the grid. These units are instrumental in bolstering power supply to networks, but their installation must be carefully planned and executed to avoid potential drawbacks such as voltage instability and excessive investment costs. To address this challenge, researchers have developed two swarm-based meta-heuristic algorithms, namely particle swarm optimization (PSO) and whale optimization algorithm (WOA), aimed at optimizing the placement and sizing of DG units for transmission network planning. In their study, Adetunji et al. utilized these algorithms alongside a supportive technique known as loss sensitivity factors (LSF) to pinpoint ideal locations for DG unit deployment within the IEEE 14-bus and 30-bus test systems. The comparison results revealed that both PSO and WOA algorithms yielded promising solutions, with each showcasing strengths in different performance metrics. For instance, WOA demonstrated superior real power loss reduction considering techno-economic factors in both test systems compared to PSO. On the other hand, PSO exhibited a more efficient total reduction in DG unit size across the bus systems. The research was conducted using MATLAB environment with simulations executed on an Intel(R) Core(TM) i7-3520M @ 2.90 GHz processor. The parameters employed in the algorithms were meticulously selected to focus on minimizing power loss and improving voltage profiles within the network. A two-stage procedure was adopted for optimal DG unit placement and sizing, beginning with identifying potential buses using LSF technique followed by meta-heuristic optimization. Overall, this study sheds light on the efficacy of PSO and WOA algorithms in optimizing the allocation and sizing of DG units within transmission networks. By leveraging these advanced computational techniques, researchers aim to mitigate operational challenges while maximizing energy efficiency in modern power systems.

• - Distributed Generation (DG) units are crucial for enhancing grid architecture and efficiency
• - Careful planning and execution of DG unit installation is necessary to avoid voltage instability and excessive costs
• - Researchers developed particle swarm optimization (PSO) and whale optimization algorithm (WOA) to optimize DG unit placement and sizing
• - Adetunji et al. used PSO and WOA along with loss sensitivity factors (LSF) to identify ideal locations for DG units in IEEE 14-bus and 30-bus test systems
• - Both PSO and WOA algorithms showed promising results, with WOA excelling in real power loss reduction while PSO was more efficient in reducing total DG unit size
• - MATLAB environment was used for simulations on an Intel(R) Core(TM) i7-3520M @ 2.90 GHz processor
• - Parameters were selected to focus on minimizing power loss and improving voltage profiles within the network
• - Two-stage procedure involved identifying potential buses using LSF technique followed by meta-heuristic optimization for optimal DG unit placement and sizing
• - Study highlights the effectiveness of PSO and WOA algorithms in optimizing allocation and sizing of DG units in transmission networks

Summary1. Small power units called Distributed Generation (DG) are important for making the electricity system better and more efficient. 2. It's very important to carefully plan and install these DG units so that they don't cause problems like unstable electricity or too much money. 3. Scientists made special computer programs, like particle swarm optimization (PSO) and whale optimization algorithm (WOA), to help decide where and how big the DG units should be. 4. Some researchers used these programs to find the best spots for DG units in test systems with 14 or 30 electric buses, which are like stops on a route. 5. The PSO and WOA programs worked well, with WOA being good at reducing power loss and PSO being good at making sure the DG units aren't too big. Definitions- Distributed Generation (DG): Small power sources that help improve the electricity system. - Optimization: Finding the best solution using computer programs or algorithms. - Voltage instability: When there are sudden changes in electrical voltage that can cause problems. - Efficiency: Doing things well without wasting time or energy. - Simulation: Pretending something is happening on a computer to see what might really happen in real life.

In the ever-evolving landscape of power systems, Distributed Generation (DG) units have emerged as a critical component in enhancing the overall efficiency and reliability of the grid. These units are small-scale power generation sources that are connected to distribution networks, providing additional supply and support to traditional centralized power plants. However, their installation must be carefully planned and executed to avoid potential drawbacks such as voltage instability and excessive investment costs. To address this challenge, researchers have turned to advanced computational techniques such as swarm-based meta-heuristic algorithms. In particular, particle swarm optimization (PSO) and whale optimization algorithm (WOA) have shown promising results in optimizing the placement and sizing of DG units for transmission network planning. In their study titled "Optimal Placement and Sizing of Distributed Generation Units using Swarm-Based Meta-Heuristic Algorithms," Adetunji et al. utilized these algorithms alongside a supportive technique known as loss sensitivity factors (LSF) to pinpoint ideal locations for DG unit deployment within two test systems – IEEE 14-bus and 30-bus networks. The comparison results revealed that both PSO and WOA algorithms yielded promising solutions, with each showcasing strengths in different performance metrics. For instance, WOA demonstrated superior real power loss reduction considering techno-economic factors in both test systems compared to PSO. On the other hand, PSO exhibited a more efficient total reduction in DG unit size across the bus systems. The research was conducted using MATLAB environment with simulations executed on an Intel(R) Core(TM) i7-3520M @ 2.90 GHz processor. The parameters employed in the algorithms were meticulously selected to focus on minimizing power loss and improving voltage profiles within the network. A two-stage procedure was adopted for optimal DG unit placement and sizing, beginning with identifying potential buses using LSF technique followed by meta-heuristic optimization. This approach allows for a more comprehensive evaluation of potential locations while also considering technical constraints and economic factors. Overall, this study sheds light on the efficacy of PSO and WOA algorithms in optimizing the allocation and sizing of DG units within transmission networks. By leveraging these advanced computational techniques, researchers aim to mitigate operational challenges while maximizing energy efficiency in modern power systems. One of the key advantages of using swarm-based meta-heuristic algorithms is their ability to handle complex optimization problems with multiple objectives. In the case of DG unit placement and sizing, there are several variables that need to be considered, such as network topology, load demand, technical constraints, and economic factors. These algorithms can efficiently search through a large solution space to find optimal solutions that balance all these factors. Moreover, by incorporating LSF technique into the optimization process, researchers were able to identify potential locations for DG unit deployment based on their impact on system losses. This approach not only helps in reducing power loss but also improves voltage profiles within the network – a crucial factor in maintaining grid stability. The results from this study have significant implications for power system planning and operation. With increasing penetration of renewable energy sources and growing demand for distributed generation systems, it is essential to have efficient methods for optimal placement and sizing of DG units. The use of advanced computational techniques like PSO and WOA can greatly aid in this process by providing more accurate solutions while also considering various technical and economic aspects. In conclusion, Adetunji et al.'s research highlights the effectiveness of swarm-based meta-heuristic algorithms in optimizing the placement and sizing of DG units within transmission networks. Their findings demonstrate how these advanced computational techniques can help address some of the challenges associated with integrating distributed generation into traditional power systems. As technology continues to advance at a rapid pace, it is likely that we will see further developments in this field that will lead to even more efficient and reliable power systems.