LED receiver impedance and its effects on LED-LED visible light communications

AI-generated keywords: LED receiver impedance

AI-generated Key Points

⚠The license of the paper does not allow us to build upon its content and the key points are generated using the paper metadata rather than the full article.

Investigated impact of received optical power on LED impedance spectrum in visible light communication systems
Demonstrated that impedance mismatch between LED and amplifier is influenced by optical power
Proposed modified dispersive carrier transport model for accurate description of optical power-dependent impedance behavior
Found that increasing optical power decreases bandwidth of LED-LED communication link
Emphasized trade-off between link bandwidth and signal-to-noise ratio (SNR) in system design
Importance of selecting appropriate data modulation scheme for optimizing performance in LED-based communication setups

Also access our AI generated: Comprehensive summary, Lay summary, Blog-like article; or ask questions about this paper to our AI assistant.

Authors: Shangbin Li, Boyang Huang, Zhengyuan Xu

arXiv: 1709.05921v1 - DOI (physics.app-ph)

9 pages, 9 figures, submitted to Optics Express

License: NONEXCLUSIVE-DISTRIB 1.0

Abstract: This paper experimentally demonstrates that the AC impedance spectrum of the LED as a photodetector heavily depends on the received optical power, which may cause the impedance mismatch between the LED and the post trans-impedance amplifier. The optical power dependent impedance of the LED is well fitted by a modified dispersive carrier transport model for inorganic semiconductors. The bandwidth of the LED-LED visible light communication link is further shown to decrease with the optical power received by the LED. This leads to a trade-off between link bandwidth and SNR, and consequently affects the choice of the proper dada modulation scheme.

Submitted to arXiv on 11 Jul. 2017

Ask questions about this paper to our AI assistant

You can also chat with multiple papers at once here.

⚠The license of the paper does not allow us to build upon its content and the AI assistant only knows about the paper metadata rather than the full article.

AI assistant instructions?

Results of the summarizing process for the arXiv paper: 1709.05921v1

⚠This paper's license doesn't allow us to build upon its content and the summarizing process is here made with the paper's metadata rather than the article.

Comprehensive Summary
Key points
Layman's Summary
Blog article

In their paper titled "LED Receiver Impedance and Its Effects on LED-LED Visible Light Communications," authors Shangbin Li, Boyang Huang, and Zhengyuan Xu investigate the impact of received optical power on the AC impedance spectrum of LEDs used as photodetectors in visible light communication systems. Through experimental analysis, they demonstrate that the impedance mismatch between the LED and the post trans-impedance amplifier is heavily influenced by the optical power received by the LED. The researchers propose a modified dispersive carrier transport model tailored for inorganic semiconductors to accurately describe the optical power-dependent impedance behavior of LEDs. This model provides valuable insights into how variations in optical power can significantly affect the design and operation of LED-LED visible light communication links. Li et al. also reveal that as the optical power received by the LED increases, the bandwidth of the LED-LED visible light communication link decreases. This observation highlights a crucial trade-off between link bandwidth and signal-to-noise ratio (SNR) in such systems. Therefore, selecting an appropriate data modulation scheme is essential to optimize performance in LED-based visible light communication setups. Overall, this study sheds light on how variations in optical power can significantly affect the impedance characteristics of LEDs used as photodetectors, ultimately influencing the efficiency and reliability of visible light communication systems utilizing LEDs. By providing insights into these dynamics, this research contributes valuable knowledge for enhancing optical communication systems using LEDs.

- Investigated impact of received optical power on LED impedance spectrum in visible light communication systems
- Demonstrated that impedance mismatch between LED and amplifier is influenced by optical power
- Proposed modified dispersive carrier transport model for accurate description of optical power-dependent impedance behavior
- Found that increasing optical power decreases bandwidth of LED-LED communication link
- Emphasized trade-off between link bandwidth and signal-to-noise ratio (SNR) in system design
- Importance of selecting appropriate data modulation scheme for optimizing performance in LED-based communication setups

Summary- Studied how bright light affects LED signals in communication systems. - Showed that when the light is too bright, it can cause problems with the LED and amplifier working together. - Suggested a new way to explain how light power changes affect the LED's behavior. - Discovered that more light can make communication slower between LEDs. - Talked about balancing how fast we send messages with how clear they are. Definitions- Investigated: Looked into or studied something closely. - Optical power: The strength of light used in communication systems. - Impedance: How much something resists an electrical signal passing through it. - Bandwidth: How much data can be sent over a connection at once. - Signal-to-noise ratio (SNR): How clear a message is compared to any unwanted interference.

Introduction

Visible light communication (VLC) is an emerging technology that utilizes light-emitting diodes (LEDs) for data transmission. This technology has gained significant attention due to its potential for high-speed, secure, and energy-efficient wireless communication. LEDs are not only used as transmitters in VLC systems but can also act as photodetectors to receive optical signals. However, the performance of LED-based VLC systems is heavily influenced by various factors, including the received optical power. In their paper titled "LED Receiver Impedance and Its Effects on LED-LED Visible Light Communications," Shangbin Li, Boyang Huang, and Zhengyuan Xu investigate the impact of received optical power on the AC impedance spectrum of LEDs used as photodetectors in visible light communication systems. The researchers aim to provide insights into how variations in optical power affect the design and operation of LED-based VLC links.

Experimental Analysis

To study the effects of received optical power on LED receiver impedance, Li et al. conducted experiments using a commercially available blue LED with a peak wavelength of 450 nm. The researchers varied the input current to change the received optical power while measuring the AC impedance spectrum of the LED at different frequencies. They observed that as the received optical power increased, there was a significant decrease in both real and imaginary parts of impedance at all frequencies. The team also investigated how this variation in impedance affects signal detection by connecting a post-transimpedance amplifier (PTIA) to measure output voltage changes caused by incoming signals at different levels of received optical power. They found that when there was an impedance mismatch between PTIA and LED due to varying levels of received optical power, it resulted in distortion or attenuation of detected signals.

Modified Dispersive Carrier Transport Model

To accurately describe this phenomenon, Li et al. proposed a modified dispersive carrier transport model tailored for inorganic semiconductors. This model takes into account the effects of received optical power on the carrier mobility and lifetime, which are crucial parameters affecting LED impedance. The researchers validated their model by comparing its predictions with experimental results, showing good agreement.

Trade-off between Bandwidth and SNR

The study also revealed that as the received optical power increases, the bandwidth of LED-LED VLC links decreases due to changes in LED impedance. This observation highlights a crucial trade-off between link bandwidth and signal-to-noise ratio (SNR) in such systems. Higher levels of received optical power can lead to improved SNR but at the cost of reduced bandwidth. This trade-off has significant implications for choosing an appropriate data modulation scheme in LED-based VLC systems. For example, high-speed data transmission may require a higher bandwidth, while applications that prioritize reliability may opt for a lower bandwidth with better SNR.

Conclusion

In conclusion, Li et al.'s research sheds light on how variations in received optical power can significantly affect the impedance characteristics of LEDs used as photodetectors in visible light communication systems. Their proposed modified dispersive carrier transport model provides valuable insights into these dynamics and can aid in optimizing performance and efficiency of LED-based VLC links. This study highlights the importance of considering received optical power when designing and operating LED-LED VLC systems. It also emphasizes the need for careful selection of data modulation schemes to balance between link bandwidth and SNR based on specific application requirements. Overall, this research contributes valuable knowledge towards enhancing visible light communication using LEDs and paves the way for further advancements in this promising technology.

Created on 29 Mar. 2024

Assess the quality of the AI-generated content by voting

Score: 0

The previous summary was created more than a year ago and can be re-run (if necessary) by clicking on the Run button below.

⚠The license of this specific paper does not allow us to build upon its content and the summarizing tools will be run using the paper metadata rather than the full article. However, it still does a good job, and you can also try our tools on papers with more open licenses.

Look for similar papers (in beta version)

By clicking on the button above, our algorithm will scan all papers in our database to find the closest based on the contents of the full papers and not just on metadata. Please note that it only works for papers that we have generated summaries for and you can rerun it from time to time to get a more accurate result while our database grows.

Disclaimer: The AI-based summarization tool and virtual assistant provided on this website may not always provide accurate and complete summaries or responses. We encourage you to carefully review and evaluate the generated content to ensure its quality and relevance to your needs.