Results of the summarizing process for the arXiv paper: 1605.06736v1

The study presents the development of a versatile and compact Doppler lidar system for wind and visibility detection in the atmospheric boundary layer. The system utilizes an upconversion single-photon detection method, ensuring eye safety and high optical coupling efficiency. To guarantee stability, an all-fiber and polarization maintaining architecture is implemented. Integrated-optic components are used to conserve the etendue of the optical receiver, including a fiber-coupled periodically poled Lithium niobate waveguide and an all-fiber Fabry-Perot interferometer (FPI). The system incorporates a double-edge direct detection technique using a single-channel FPI and a single upconversion detector along with time-division multiplexing. Over a period of 9 weeks, the relative error of the system remains below 0.1%. To demonstrate its robustness, atmospheric wind and visibility data are collected in the boundary layer over 48 hours. In intercomparison experiments, the lidar measurements show good agreement with those obtained from an ultrasonic wind sensor (Vaisala windcap WMT52), with a standard deviation of 1.04 m/s in speed and 12.3 degrees in direction. Overall, this study presents a significant advancement in Doppler lidar technology by introducing a compact and efficient system that can accurately measure atmospheric wind and visibility parameters in real-time.

• - Development of a versatile and compact Doppler lidar system for wind and visibility detection in the atmospheric boundary layer
• - Utilization of an upconversion single-photon detection method for eye safety and high optical coupling efficiency
• - Implementation of an all-fiber and polarization maintaining architecture for stability
• - Use of integrated-optic components to conserve the etendue of the optical receiver, including a fiber-coupled periodically poled Lithium niobate waveguide and an all-fiber Fabry-Perot interferometer (FPI)
• - Incorporation of a double-edge direct detection technique using a single-channel FPI and a single upconversion detector along with time-division multiplexing
• - Consistent relative error below 0.1% over a period of 9 weeks
• - Collection of atmospheric wind and visibility data in the boundary layer over 48 hours to demonstrate robustness
• - Good agreement with measurements from an ultrasonic wind sensor (Vaisala windcap WMT52), with standard deviation values of 1.04 m/s in speed and 12.3 degrees in direction
• - Introduction of a compact and efficient system that accurately measures atmospheric wind and visibility parameters in real-time

Scientists made a small and versatile machine that can measure wind and visibility in the air. They used a special method to detect light that is safe for our eyes and works well. The machine is stable because it uses special parts made of fiber. It also has a way to save space by using certain components. The machine was tested for 9 weeks and had very little error. It was also compared to another sensor and gave similar results. This new machine is small, fast, and accurate at measuring the weather." Definitions- Doppler lidar: A device that uses laser light to measure wind speed by detecting changes in the frequency of the light. - Upconversion single-photon detection: A method of detecting very weak light signals by converting them into higher energy photons. - Optical coupling efficiency: How well light is transferred between different optical components. - Fiber-coupled periodically poled Lithium niobate waveguide: A type of optical component made from a special material that can change the frequency of light passing through it. - Fabry-Perot interferometer (FPI): An instrument that measures the intensity of light by splitting it into two beams and then recombining them. - Double-edge direct detection technique: A method of detecting light signals by looking at both edges or sides of the signal. - Time-division multiplexing: A technique where multiple signals are transmitted over a single channel by taking turns sending each signal at different times. - Relative error: The difference between

Doppler Lidar System for Wind and Visibility Detection in the Atmospheric Boundary Layer

In recent years, Doppler lidar systems have become increasingly popular for measuring wind speed and direction as well as visibility parameters in the atmospheric boundary layer. This study presents a versatile and compact Doppler lidar system that utilizes an upconversion single-photon detection method to ensure eye safety and high optical coupling efficiency. The system is designed with an all-fiber and polarization maintaining architecture to guarantee stability, while integrated-optic components are used to conserve the etendue of the optical receiver.

System Design

The proposed system incorporates a double-edge direct detection technique using a single-channel Fabry-Perot interferometer (FPI) and a single upconversion detector along with time division multiplexing. To achieve this, an all-fiber FPI is coupled with a fiber-coupled periodically poled Lithium niobate waveguide (PPLN). This combination enables efficient light collection from both edges of the FPI cavity at different times, which allows for simultaneous measurement of wind speed and direction without any additional hardware or complexity.

Experimental Results

To test its performance, relative error measurements were taken over 9 weeks where it remained below 0.1%. Furthermore, atmospheric wind and visibility data was collected in the boundary layer over 48 hours to demonstrate its robustness. In intercomparison experiments between this system's measurements against those obtained from an ultrasonic wind sensor (Vaisala windcap WMT52), good agreement was found with a standard deviation of 1.04 m/s in speed and 12.3 degrees in direction.

Conclusion

Overall, this study presents significant advancements in Doppler lidar technology by introducing a compact yet efficient system that can accurately measure atmospheric wind speed, direction, and visibility parameters in real time without sacrificing accuracy or reliability. With further development of such systems, we may soon see more widespread use of these technologies for various applications including air traffic control monitoring or weather forecasting services among others